Licences pour Installation de revêtement extérieur au Québec
Siding installation requires an RBQ contractor licence. No specific individual worker licence is required outside of regulated construction sites.
Key facts
En un coup d'œil
Faits clés sur les licences pour les installation de revêtement extérieurs au Québec
Classification du métier
Unregulated Trade
No Licence Required
Sceau rouge
Non disponible
Permis
Généralement non requis
Assurance
Recommandé
The details
Exigences de licence
What it takes to qualify
Credentials, training, and coverage for this trade
- No Red Seal endorsement for this trade
- Liability insurance is recommended
Siding installation in Quebec requires contractors to hold the appropriate RBQ licence for construction work. On regulated construction sites, workers may need a CCQ competency certificate. Building permits may be required for re-siding, especially if existing siding is being removed. The Quebec Construction Code specifies requirements for moisture barriers, air barriers, and insulation behind siding. CNESST safety regulations apply for working at heights.
Organisme de réglementation
RBQ for contractor licensing; CNESST for workplace safety
Visiter le site officielComment vérifier
Ask for the contractor's RBQ licence number and verify it on the online Licence Holders' Registry.
Buyer beware
Signaux d'alerte à surveiller
Signaux d'alerte lors de l'embauche d'un installation de revêtement extérieur
Installs siding over old damaged siding without addressing underlying rot or moisture issues
Skips housewrap or moisture barrier installation
No proper flashing around windows and doors - leading cause of water infiltration
No WSIB coverage for workers at height on scaffolding
Before you sign
Questions à poser avant d'embaucher
A few minutes now saves you later
Posez ces questions avant de signer tout contrat
- Will you remove the old siding and inspect the sheathing underneath?
- What moisture barrier and flashing details are included?
- Do you carry liability insurance and WSIB coverage?
- What siding brand do you recommend, and what is the manufacturer warranty?
- What is your workmanship warranty, and does it cover issues like buckling or warping?
Good to know
Questions fréquemment posées
Les installation de revêtement extérieurs au Québec ont-ils besoin d'une licence ?
Siding installation in Quebec requires contractors to hold the appropriate RBQ licence for construction work. On regulated construction sites, workers may need a CCQ competency certificate. Building permits may be required for re-siding, especially if existing siding is being removed. The Quebec Construction Code specifies requirements for moisture barriers, air barriers, and insulation behind siding. CNESST safety regulations apply for working at heights.
Comment puis-je vérifier les qualifications d'un installation de revêtement extérieur au Québec ?
Ask for the contractor's RBQ licence number and verify it on the online Licence Holders' Registry.
Quels sont les signaux d'alarme à surveiller au moment d'embaucher un installation de revêtement extérieur ?
(1) Installs siding over old damaged siding without addressing underlying rot or moisture issues (2) Skips housewrap or moisture barrier installation (3) No proper flashing around windows and doors - leading cause of water infiltration (4) No WSIB coverage for workers at height on scaffolding
Quelles questions devrais-je poser avant d'embaucher un installation de revêtement extérieur ?
(1) Will you remove the old siding and inspect the sheathing underneath? (2) What moisture barrier and flashing details are included? (3) Do you carry liability insurance and WSIB coverage? (4) What siding brand do you recommend, and what is the manufacturer warranty? (5) What is your workmanship warranty, and does it cover issues like buckling or warping?
Mon installation de revêtement extérieur devrait-il détenir une assurance ?
Bien que cela ne soit pas exigé par la loi, il est fortement recommandé que les installation de revêtement extérieurs détiennent une assurance responsabilité. Demandez une preuve de couverture avant d'embaucher.
Mon entrepreneur installation de revêtement extérieur a-t-il besoin d'une licence de la RBQ ?
Au Québec, la plupart des entrepreneurs qui exécutent des travaux de construction doivent détenir une licence de la RBQ (Régie du bâtiment du Québec). Vous pouvez vérifier la licence de tout entrepreneur dans le Registre des détenteurs de licence en ligne de la RBQ à rbq.gouv.qc.ca. Demandez toujours le numéro de licence et vérifiez-le avant d'embaucher.
Combien coûte un installation de revêtement extérieur au Québec ?
Les tarifs habituels pour les installation de revêtement extérieurs au Québec varient de $50-$90/hour. Siding material (vinyl, insulated vinyl, fibre cement, engineered wood, aluminum), square footage of exterior walls, number of storeys, removal and disposal of old siding, housewrap and moisture barrier installation, trim and corner work, window and door flashing, soffit and fascia condition, and insulation backing. Labour accounts for 40-60% of the total cost. GTA prices are 15-20% higher than smaller Ontario cities. Energy rebate programs can offset up to $5,000 for insulated siding retrofits.
Keep exploring
Licences des métiers connexes
Prêt à embaucher un Installation de revêtement extérieur?
Obtenez des soumissions gratuites de professionnels vérifiés au Québec. Comparez les évaluations, les références et les prix.